Biomechanical analysis of a novel hook-screw technique for C1-2 stabilization: Technical note
Document Type
Article
Abstract
The Food and Drug Administration has not cleared the following medical devices for the use described in this study. The following medical devices are being discussed for an off-label use: cervical lateral mass screws. Object. As an alternative for cases in which the anatomy and spatial relationship between C-2 and a vertebral artery precludes insertion of C-2 pedicle/pars or C1-2 transarticular screws, a technique that includes opposing laminar hooks (claw) at C-2 combined with C-1 lateral mass screws may be used. The biomechanical stability of this alternate technique was compared with that of a standard screw-rod technique in vitro. Methods. Flexibility tests were performed in 7 specimens (occiput to C-3) in the following 6 different conditions: 1) intact; 2) after creating instability and attaching a posterior cable/graft at C1-2; 3) after removing the graft and attaching a construct comprising C-1 lateral mass screws and C-2 laminar claws; 4) after reattaching the posterior cable-graft at C1-2 (posterior hardware still in place); 5) after removing the posterior cable-graft and laminar hooks and placing C-2 pedicle screws interconnected to C-1 lateral mass screws via rod; and 6) after reattaching the posterior cable-graft at C1-2 (screw-rod construct still in place). Results. All types of stabilization significantly reduced the range of motion, lax zone, and stiff zone compared with the intact condition. There was no significant biomechanical difference in terms of range of motion or lax zone between the screw-rod construct and the screw-claw-rod construct in any direction of loading. Conclusions. The screw-claw-rod technique restricts motion much like the standard Harms technique, making it an acceptable alternative technique when aberrant arterial anatomy precludes the placement of C-2 pars/pedicle screws or C1-2 transarticular screws.
Keywords
Atlantoaxial instability, Cervical laminar hook, Cervical spine, Craniovertebral junction, Posterior cervical surgery, Posterior stabilization, Stabilization
Publication Date
9-1-2012
Publication Title
Journal of Neurosurgery: Spine
ISSN
15475654
E-ISSN
15475646
Volume
17
Issue
3
First Page
220
Last Page
226
PubMed ID
22769729
Digital Object Identifier (DOI)
10.3171/2012.5.SPINE1242
Recommended Citation
Reis, Marco Túlio; Nottmeier, Eric W.; Reyes, Phillip M.; Baek, Seungwon; and Crawford, Neil R., "Biomechanical analysis of a novel hook-screw technique for C1-2 stabilization: Technical note" (2012). Translational Neuroscience. 764.
https://scholar.barrowneuro.org/neurobiology/764